Tiling

Laying ceramic tile is not very difficult, so you can do it on their own. Certainly we must do it carefully, maintain accuracy and to follow certain guidelines. There are three popular ways of tiling. The first one is sticking tiles on the floor using a special adhesive imposed float. The second is called. "Vibration method" used when laying tiles on large surfaces. Stacked plates are larger and thicker the standard. They are stuck in the cement mortar covered with a layer of szczepną. This ensures a level surface and to obtain better adhesion of platelets to the mortar in order to obtain greater strength. The third method is the mechanical attachment using anchors. It is used on the facades of buildings. Used plates are large, and specifically from 30x60cm to 60x120cm. Technology can not be ventilated, however, applied everywhere. Bonded at high elevations of the buildings pose a danger of falling off the tiles in the case przemarznięcia elevation, but in countries where the climate is hot, maximum height, which are operated such elevations reach 50 floors.

Glaze

Ceramic tiles, commonly known as the tiles are usually produced from a mixture of clay, silica and pigments. After appropriate treatment of burns to be at high temperature. Depending on the nature, durability, color and glazing (shiny or matte) are used in the lining of the surface of the wall in different rooms and outdoor living. Depending on the factors which will be exposed dopieramy them up to the room. Stack on the floor terracotta, tiles on the walls (the thinner and more fragile terracotta). In places where the cladding is exposed to noxious agents compose nieszkliwiony tiles, which is resistant to abrasion and little nasiąkliwy. Gres porcelain compose mainly for ornamental, both on the floor and wall, is usually glazed and has greater resistance to fracture than traditional tile or tiles. Clinker is a tile in different colors of undersized (custom) fields surface. Cotto is a plate in red and porous surfaces, some of them are very resistant to impact. For attaching the tiles to the surface most often used special adhesives.